If you are having trouble with the battery in your GMC key fob, it is time to get a replacement. In fact, you can save some money by replacing the batteries with Energizer batteries. They are a great replacement for the OEM remote batteries.
Low battery causes key fobs to function inconsistently
In fact, if you have a car with a keyless entry system, the battery can be the limiting factor. It may be time to replace it. The good news is, this is easy to do. Just follow a few simple steps, and your keys should be ready to roll again.
For starters, you’ll need to take the fob out of the vehicle. This can be accomplished with a flathead screwdriver. If your vehicle has a locking door, you may not need to replace the battery at all.
You may also want to check your vehicle’s signal strength. Typical key fob range is about 30 to 60 feet. However, weather and other factors can change the signal’s power.
Lastly, you’ll want to test your key to see if it has a working signal. If you’re lucky, you might have a chance to have the vehicle technician fix it for free.
Although there’s no silver bullet, replacing the key fob battery is a good way to get your car back on the road. This small task can save you a lot of headaches in the future. Even better, you’ll be able to use a new battery on your car key remote.
As a matter of fact, there are many things you can do to improve the performance of your key fob. Among them are using the right battery and making sure your keys are properly paired.
Energizer key fob batteries are a great replacement to the OEM remote battery
If you have a remote keyless entry system in your GMC and need a replacement battery, you should choose Energizer key fob batteries. They are made from high-quality materials and are guaranteed for 10 years in storage. These batteries are also much cheaper than the ones that come with the original equipment.
If your key fob is broken or you can no longer use it, you will need to replace the old battery. Thankfully, the repair process is pretty simple. You can take out the old battery with a flathead screwdriver, then put in the new one. Afterwards, you should be able to use the key fob again.
To do this, you must first remove the cover on the key slot. This usually sits on the steering column. Using a dull knife, you will be able to get to the battery area.
After you have removed the battery, you will need to insert the new one in the same orientation. Make sure the positive end is on the positive side of the previous battery.
After you have inserted the new one, you should try to press the key to see if it is working. The LED on the key should light up when you press the button. When you don’t see the light, the battery has failed.
- How to a 2011 GMC Acadia Key Fob Programming Read More…
Programming a key fob after changing the battery
If you have a GMC key fob that does not work, you may have to replace the battery. While you could pay a locksmith to do this for you, you can save money by doing it yourself.
You can find a key fob battery online and in local stores. This small watch-like battery can usually be found for less than $10.
In the process of replacing the battery, you’ll have to remove the circuit board. Before doing so, make sure to open the casing so that you can access it. The circuit board is located inside the housing of the key fob.
Next, you’ll need to insert the new battery in the same direction as the old one. Using a flathead screwdriver, pry the seam of the casing open.
For some reason, this part of the process is often difficult to achieve. However, once you’ve accomplished it, you’ll be able to program your key fob in no time.
You can also take your new key fob to a GM dealership to have it programmed. They’ll have the proper tools to do this, plus they’re typically willing to do it for free.
After you’ve completed the aforementioned steps, you should be able to test whether your key works. Once it does, you should be able to start your car.