How to Program a Key Fob For 2015 GMC Sierra

If you have just purchased a new key fob for 2015 GMC Sierra, you may be wondering how to program your key fob. There are many different things you can do with your key fob, including locking and unlocking your vehicle, turning it on and off, and even programming it.

  • Remote start

The GMC Sierra 1500 has a remote start feature that is a very useful upgrade to add. You can use it to start your vehicle, lock the doors, or even de-ice your windshield on cold days.

Before using the Sierra’s remote start feature, you will need to sign up with the GMC Owner Center and accept the User Terms. This requires entering your vehicle’s VIN number and agreeing to the Privacy Statement.

To use the GMC Sierra 1500’s remote start function, you will need to turn on the car, hold the Remote Start button for about four seconds, and then press and release the lock button. If the steering column is not unlocking, you may need to hold the lock button for another two or three seconds.

  • Smart key

A smart key fob is one of the coolest features to have on a new model GMC truck or SUV. Using a gizmo affixed to your vehicle will allow you to lock and unlock your doors with a flick of the wrist and start your engine remotely. To get the full effect, however, you’ll need to install a proxy keyless entry system, or PAS, as they’re formally known. And the good news is that it is relatively cheap and easy to do.

The best way to go about this is to hire an automotive locksmith. They’ll hook up specialized computer equipment to your vehicle, allowing you to program your coveted keyless fob. Once the job is done, the vehicle will be on the road with your new fangled fob.

  • Locking

If you are having problems with your locking key fob for 2015 GMC Sierra, the first thing to do is check the battery. A faulty or corroded battery can prevent your key from working. You should also replace your key fob every few years.

If your vehicle has an OnStar remote start system, you may be able to unlock the Sierra remotely. However, you will need to have your remote key programmed by a local automotive locksmith. This is not a job for a novice, so consider calling an expert.

It is also possible for a key fob to stop working because the internal chip is damaged. Other reasons include exposure to water, salt or rain. These types of conditions can shorten the life of your remote control battery.

  • Turning your car on/off

When you start up your 2015 GMC Sierra, you will notice that your parking lamps will turn on and off. However, if you do not wish to use your car’s remote start feature, you can just drive your vehicle to its destination without using your key fob.

The Remote Start function allows you to turn on your car’s engine from up to 300 feet away. It is also very easy to use. A few simple steps are needed to get it working.

First, you’ll need to place the car’s remote transmitter in the ‘ON’ position. Next, you’ll need to program the device. This can be a little tricky to get right on your first attempt.

Once your remote transmitter is in the ON position, you’ll need to wait two seconds. After you press the button, you’ll be able to see the countdown. In addition, you’ll need to hold the button down until the turn signal lamps begin to flash.

Programming your key fob 2015 GMC Sierra

If you own a Chevy car, you might wonder if it’s possible to program your key fob. This type of remote control is a great tool, and can make a trip much more convenient. It allows you to control your car’s engine and doors without using your hands. You can even use it to set panic alarms or open the trunk.

The first step in programming a Chevy key fob is to make sure you have the correct battery. You should be able to find this battery in a silver disc that looks like a nickel. Next, you need to get the key into the ignition. Make sure you have all your keys with you. Also, the key should be inserted in the LOCK/OFF position.

How To change the battery in a GMC key fob, follow these steps Read More…

Leave a Comment

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.